Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
What is everyone using?
#21
Honestly I don't even know where to find that information as I have just installed in the last few days and not use linux before Smile

Tara 19 Linux Mint Mate it says.

Hp Notebook AMD - A8 Radeon R5 about 900GB that comes standard for this laptop I assume. 2.0GHZ.

All runs smooth though still a bit slow on Boxes opening as it was before but just probably not a great model for opening browser windows etc. E,G 2 or 3 secs rather than 1 etc. But terminal is instant and menu? Go figure. Think it was 4 G -Ram 8 simulated or boosted maybe?
Reply
#22
I currently have two machines running Linux Mint. A rebuilt laptop that is running 18.2 and a replacement refurb desktop running 18.3.
   The laptop was rebuilt after a power surge last Fall, both the motherboard and the HDD were shot. So a parts laptop was bought from Ebay. After a few attempted installs of WIN7, I decided on trying Linux Mint. Great decision. 
   The desktop is a replacement for a long in the tooth self built PC from 2005 that started having random restart issues with any OS. So the search for a suitable replacement with a full size PCI slot was started. I wanted to repurpose my SB Audigy 2ZX Platinum Pro sound card so the PCI slot was a must. The original desktop also contained my RAID1 array for backups and A/V sharing, a new NAS unit was brought in for that task, which is working great by the way. This system has two seperate boot drives, one for Linux, as the default and another for WIN7, for any specialized Windows tasks.
   Both of these machines, run WINE with foobar2000 for higher sound quality. The laptop uses an AudioQuest DragonFly USB DAC and desktop uses the above mentioned Audigy 2ZX. Also, the above mentioned NAS contains over 30,000 audio tracks and the WIN10 Mini-PC in my main audio rack also runs through an outboard iFi iDSD Nano USB DAC. I like good sounding tunes, what can I say.
   After some initial configuration issues with the sound for Linux installs, things are now great and I'm lovin' it! 

Here are the specifics. 

1) Dell Latitude D830
    Intel Core 2 Duo CPU (T9300)
    Intel graphics
    RAM 4GB
    SSD 128GB

2) Dell Optiplex 790
    Intel Core i3 CPU (2120)
    Nvidia NVS300
    RAM 12GB
    SSD 240GB (Linux)
    HDD 320GB (WIN7)
Watch out where the huskies go and don't you eat that yellow snow. -F. Zappa
Reply
#23
(08-30-2018, 07:32 PM)dai-3 Wrote: Honestly I don't even know where to find that information as I have just installed in the last few days and not use linux before Smile

To get this info...open the Terminal and copy this command...

inxi -Fxz  
  
Then hit Enter...now copy the results into your post...or at the top of your post there's a blue scroll...5 from right...click it and copy/paste your results into it and click Insert...done.
Linux Forever...Windoze Never
Reply
#24
Code:
System:    Host: silmeria Kernel: 4.15.0-20-generic x86_64 bits: 64
          Desktop: Cinnamon 3.8.8  Distro: Linux Mint 19 Tara
Machine:   Device: laptop System: Micro-Star product: GE72MVR 7RG v: REV:1.0 serial: N/A
          Mobo: Micro-Star model: MS-179C v: REV:1.0 serial: N/A
          UEFI: American Megatrends v: E179CIMS.308 date: 10/27/2017
Battery    BAT1: charge: 45.0 Wh 96.2% condition: 46.8/53.4 Wh (88%)
CPU:       Quad core Intel Core i7-7700HQ (-MT-MCP-) cache: 6144 KB
          clock speeds: max: 3800 MHz 1: 800 MHz 2: 800 MHz 3: 800 MHz
          4: 800 MHz 5: 800 MHz 6: 799 MHz 7: 800 MHz 8: 800 MHz
Graphics:  Card-1: Intel Device 591b
          Card-2: NVIDIA GP104M [GeForce GTX 1070 Mobile]
          Display Server: x11 (X.Org 1.19.6 )
          drivers: modesetting,nvidia (unloaded: fbdev,vesa,nouveau)
          Resolution: 1920x1080@120.00hz
          OpenGL: renderer: GeForce GTX 1070/PCIe/SSE2
          version: 4.6.0 NVIDIA 390.48
Audio:     Card Intel CM238 HD Audio Controller driver: snd_hda_intel
          Sound: Advanced Linux Sound Architecture v: k4.15.0-20-generic
Network:   Card-1: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter
          driver: ath10k_pci
          IF: wlp2s0 state: up mac: <filter>
          Card-2: Qualcomm Atheros Killer E2500 Gigabit Ethernet Controller
          driver: alx
          IF: enp3s0 state: down mac: <filter>
          Card-3: Atheros
          IF: null-if-id state: N/A speed: N/A duplex: N/A mac: N/A
Drives:    HDD Total Size: 1128.2GB (1.2% used)
          ID-1: /dev/nvme0n1 model: SAMSUNG_MZVPV128HDGM size: 128.0GB
          ID-2: /dev/sda model: Samsung_SSD_850 size: 1000.2GB
Partition: ID-1: / size: 113G used: 6.3G (6%) fs: ext4 dev: /dev/nvme0n1p3
          ID-2: /home size: 916G used: 2.8G (1%) fs: ext4 dev: /dev/sda1
          ID-3: swap-1 size: 4.10GB used: 0.00GB (0%)
          fs: swap dev: /dev/nvme0n1p2
RAID:      No RAID devices: /proc/mdstat, md_mod kernel module present
Sensors:   System Temperatures: cpu: 59.5C mobo: 27.8C gpu: 41C
          Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 251 Uptime: 33 min Memory: 1796.0/15921.5MB
          Client: Shell (bash) inxi: 2.3.56

MSI GE72MVR-7RG Apache Pro

Just installed Linux Mint 19, and it works pretty well
Reply
#25
Thanks Smile

Kernel: 4.15.0-33-generic x86_64
bits: 64 gcc: 7.3.0
Desktop: MATE 1.20.1 (Gtk 3.22.30-1ubuntu1) Distro: Linux Mint 19 Tara
Machine: Device: laptop System: Hewlett-Packard product: HP 15 Notebook PC

Quad core AMD A8-6410 APU with AMD Radeon R5 Graphics

Card: Advanced Micro Devices [AMD/ATI] Mullins [Radeon R4/R5 Graphics]

Audio
Card-1 Advanced Micro Devices [AMD] FCH Azalia Controller
driver: snd_hda_intel bus-ID: 00:14.2
Card-2 Advanced Micro Devices [AMD/ATI] Kabini HDMI/DP Audio
driver: snd_hda_intel bus-ID: 00:01.1
Sound: Advanced Linux Sound Architecture v: k4.15.0-33-generic
Network: Card-1: Realtek RTL8188EE Wireless Network Adapter

Drives: HDD Total Size: 1000.2GB (3.1% used)
ID-1: /dev/sda model: TOSHIBA_MQ01ABD1 size: 1000.2GB


I'll probably forget that command Smile

(08-31-2018, 01:14 AM)bob777 Wrote:
(08-30-2018, 07:32 PM)dai-3 Wrote: Honestly I don't even know where to find that information as I have just installed in the last few days and not use linux before Smile

To get this info...open the Terminal and copy this command...

inxi -Fxz  
  
Then hit Enter...now copy the results into your post...or at the top of your post there's a blue scroll...5 from right...click it and copy/paste your results into it and click Insert...done.
Reply
#26
Lenovo Ideapad 110 (80UD0148IH) Laptop (Core i5 6th Gen/8 GB/1 TB/Windows 10/2 GB)
Performance Core i5 6th Gen2.3 Ghz8 GB DDR3 RAM2 GB Graphics
Design 15.6 inches (39.62 cm)1366 x 768 pixels2.4 Kg, 25.0 mm thick
Storage 1 TB HDDSATA5400 RPM
Battery Li-Ion4 Cell
Reply
#27
This is today's setup on my main machine. I wish that I could have gotten a i7 when I built this machine.

Steve


Code:
System:
 Host: universe Kernel: 4.14.67-1-lts x86_64 bits: 64 Desktop: Xfce 4.12.4
 Distro: Arch Linux
Machine:
 Type: Desktop Mobo: ASUSTeK model: P8P67 PRO v: Rev 1.xx serial: <filter>
 BIOS: American Megatrends v: 3602 date: 11/01/2012
CPU:
 Topology: Quad Core model: Intel Core i5-2500K bits: 64 type: MCP
 L2 cache: 6144 KiB
 Speed: 1648 MHz min/max: 1600/5900 MHz Core speeds (MHz): 1: 1648 2: 1648
 3: 1648 4: 1648
Graphics:
 Card-1: NVIDIA GP107 [GeForce GTX 1050 Ti] driver: nouveau v: kernel
 Display: x11 server: X.Org 1.20.1 driver: nouveau
 unloaded: fbdev,modesetting,vesa resolution: 1920x1080~60Hz
 Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
 Card-1: Intel 6 Series/C200 Series Family High Definition Audio
 driver: snd_hda_intel
 Card-2: NVIDIA GP107GL High Definition Audio driver: snd_hda_intel
 Sound Server: ALSA v: k4.14.67-1-lts
Network:
 Card-1: Intel 82579V Gigabit Network driver: e1000e
 IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
 Local Storage: total: 473.14 GiB used: 10.87 GiB (2.3%)
 ID-1: /dev/sda vendor: Western Digital model: WD5000AAKX-00ERMA0
 size: 465.76 GiB
 ID-2: /dev/sdb type: USB model: N/A size: 7.38 GiB
Partition:
 ID-1: / size: 457.45 GiB used: 10.87 GiB (2.4%) fs: ext4 dev: /dev/sda1
Sensors:
 System Temperatures: cpu: 29.8 C mobo: 27.8 C
 Fan Speeds (RPM): cpu: 0
Info:
 Processes: 159 Uptime: 1h 08m Memory: 7.76 GiB used: 980.4 MiB (12.3%)
 Shell: bash inxi: 3.0.20
Reply
#28
System:    Host: 00arch Kernel: 5.1.16-arch1-1-ARCH x86_64 bits: 64 compiler: gcc v: 9.1.0 Desktop: Gnome 3.32.2
           Distro: Arch Linux
Machine:   Type: Desktop Mobo: ASUSTeK model: M5A99FX PRO R2.0 v: Rev 1.xx serial: <filter> BIOS: American Megatrends v: 2501
           date: 04/07/2014
CPU:       Topology: 8-Core model: AMD FX-8350 bits: 64 type: MCP arch: Bulldozer L2 cache: 2048 KiB
           flags: avx lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 64239
           Speed: 1401 MHz min/max: 1400/4000 MHz Core speeds (MHz): 1: 1399 2: 1404 3: 1401 4: 1403 5: 1403 6: 1401 7: 1402
           8: 1401
Graphics:  Device-1: NVIDIA GP107 [GeForce GTX 1050 Ti] vendor: eVga.com. driver: nvidia v: 430.26 bus ID: 05:00.0
           Display: x11 server: X.Org 1.20.5 driver: nvidia unloaded: modesetting,vesa
           resolution: 1920x1080~60Hz, 1920x1080~60Hz
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: Advanced Micro Devices [AMD/ATI] SBx00 Azalia vendor: ASUSTeK driver: snd_hda_intel v: kernel
           bus ID: 00:14.2
           Device-2: NVIDIA GP107GL High Definition Audio vendor: eVga.com. driver: snd_hda_intel v: kernel bus ID: 05:00.1
           Sound Server: ALSA v: k5.1.16-arch1-1-ARCH
Network:   Device-1: Intel Wireless 7260 driver: iwlwifi v: kernel port: f000 bus ID: 03:00.0
           IF: wlp3s0 state: down mac: <filter>
           Device-2: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: ASUSTeK P8 series driver: r8169 v: kernel
           port: c000 bus ID: 0a:00.0
           IF: enp10s0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:    Local Storage: total: 3.67 TiB used: 49.50 GiB (1.3%)
           ID-1: /dev/sda vendor: Western Digital model: WD1005FBYZ-01YCBB2 size: 931.51 GiB
           ID-2: /dev/sdb vendor: Western Digital model: WD1005FBYZ-01YCBB2 size: 931.51 GiB
           ID-3: /dev/sdc vendor: Western Digital model: WD1005FBYZ-01YCBB2 size: 931.51 GiB
           ID-4: /dev/sdd vendor: Western Digital model: WD1005FBYZ-01YCBB2 size: 931.51 GiB
           ID-5: /dev/sde type: USB vendor: SanDisk model: Ultra size: 28.64 GiB
RAID:      Device-1: md0 type: mdraid status: active Components: online: sda2~c0 sdd2~c3 sdc2~c2 sdb2~c1
           Info: raid: raid-0 blocks: 67043328 report: N/A chunk size: 64k
           Device-2: md1 type: mdraid status: active Components: online: sda3~c0 sdd3~c3 sdc3~c2 sdb3~c1
           Info: raid: raid-0 blocks: 3839408896 report: N/A chunk size: 64k
Partition: ID-1: / size: 62.68 GiB used: 15.52 GiB (24.8%) fs: ext4 dev: /dev/md0
           ID-2: /home size: 3.52 TiB used: 33.74 GiB (0.9%) fs: ext4 dev: /dev/md1
Sensors:   System Temperatures: cpu: 31.1 C mobo: N/A gpu: nvidia temp: 48 C
           Fan Speeds (RPM): cpu: 0 gpu: nvidia fan: 0%
Info:      Processes: 268 Uptime: 32m Memory: 15.47 GiB used: 1.14 GiB (7.4%) Init: systemd Compilers: gcc: 9.1.0 Shell: bash
           v: 5.0.7 inxi: 3.0.34
Reply
#29
"Current laptop" - second-hand, purchased without OS and without power supply for the princely sum of NZ$74 from an online auction back in June 2017 (plus NZ$18 for a charger plus US$3.95 and GBP 2.32 for a couple of "Powered by Debian" decals).

Machine: ASUS X58Le
Screen: 15.6" HD 1360x768
Storage: 140 GB SATA HDD
Memory: 3 GB DDR2 667 MHz SDRAM
Processor 0: Intel Pentium Dual CPU T3400 @ 2.16 GHz
Processor 1: Intel Pentium Dual CPU T3400 @ 2.16 GHz
Graphics: Intel GMA X3100 Gfx
Mouse: Logitech "Trackman Wheel" Trackball
Keyboard: "Wolf Ergoboard Mk I" (homemade) - Cherry MX switches (mostly browns), modified Dvorak layout
External Monitor: AOC 22" Widescreen HD 1920x1080
OS: Linux
Distro: Debian
Release: 8.11 (jessie)
Desktop: MATE 1.8.1

Purchased to replace my old laptop (see below) after determining that there would be no issues running Linux on it.


"Old laptop" - second hand, given to me back in 2010 with Windows 7 installed.

Machine: IBM Lenovo ThinkPad T43
Screen: 15" 1024 x 768
Storage: 70 GB HDD
Memory: 2 GB 533 MHz RAM
Processor 0: Intel Pentium M 750 @ 1.86 GHz
Graphics: ATI Mobility Radeon X300
OS: Linux
Distro: Debian
Release: 8.8 (jessie)
Desktop: MATE 1.8.1

Upgraded from Windows 7 to Linux in May 2017.  The machine is still working (albeit with its 4th CPU fan, 3rd keyboard and 2nd screen and a dead battery) and is being used by my youngest son.


Desktop - second hand, purchased for NZ$50 in May 2017 solely to function as a test machine for my Linux build prior to upgrading my ThinkPad to Linux.  Came with Windows 7, but that didn't last long.

Machine: Dell GX280
Storage: 160 GB SATA HDD
Memory: 4 GB DDR2 400 MHz SDRAM
Processor 0: Intel Pentium 4 540 @ 3.2 GHz
Graphics: ATI Radeon X300 SE
OS: Linux
Distro: Debian
Release: 8.8 (jessie)
Desktop: MATE 1.8.1

Hasn't been used much since I used it to test my Linux build and my son's pinched the 19" monitor from it, anyway, because the screen on the ThinkPad needs replacing again...
Asus X58L
Debian 8 with MATE
Reply
#30
Kubuntu 18.04.2 LTS. Every time I try moving away from it to another Distro the other Distro just doesn't work as well or in some cases thing I use/need won't work at all.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)